 |
 |
 |
 |
|
 |
|
Features
- Hybrid LED Scanner / Laser Simulator – Produces sharp rays of light that scan and simulate a laser effect and beam effect
- 2 DMX Channel Modes: 12 & 15 DMX Channels
- 3 Operational modes: Sound Active, Show Mode, or DMX Control
- Stand Alone Set Up or Master-Slave Set Up
- 6 Show Modes
- 10 Colors with Split Colors
- 29 Pattern Macros
- Pattern Zoom & Rotation
- 4-degree beam angle (single beam) / 120-degree (laser simulation)
- Linkable via 3-pin XLR cable
- 4-button DMX display on rear panel
- Strobing
- DMX-512 Protocol
- Electronic Dimming: 0 - 100%
- Runs extremely cool! - NO Duty Cycles! - Run all night!
- IEC AC IN/OUT on rear to daisy chain power
- Safety Loop on top panel
- Power Draw: 41W Max (Full On)
- Multi Voltage: 100V~240V, 50/60Hz
- Power Cord Daisy Chain (Up to 16 Fixture @ 120V and Up to 30 Fixtures @ 230V)
- Power Cable Length: 1.5m (IEC)
- Long life LEDs (Rated at approximately 50,000 hours)
- ADJ UC IR Compatible (Sold Separately)
- ADJ Airstream IR App Compatible (Sold Separately)
- Light Source: 1 x 20W LumiEngin LED
- Light output: 45450 LUX @2M; 15610 LUX @4M (4-degree beam)
- Dimensions (L x W x H): 11.25” x 9.75”x 9.75” / 285x250x248mm
- Weight: 11 lbs. / 5kg.
|
|
|
|
|
|
|